Reducing Occupational Noise Propagated from Centrifugal Fan through Dissipative Silencers: A Field Study

Acoustic performance of dissipative silencer was evaluated to determine the effectiveness of perforated duct porosity and absorbent material density in reducing occupational noise exposure propagated from centrifugal fan. Design charts were applied to predict noise reduction and length of a dissipative silencer. Dissipative silencers with various punched duct porosity (14%, 30% and 40%) and sound absorbent density (80 Kg/m³, 120 Kg/m³, and 140 Kg/m³) were designed and fabricated. According to ISO9612 and ISO11820, noise level was measured before and after installing all nine test silencers at fixed workstations around the discharge side of a centrifugal fan in a manufacturing plant. On average, the noise level at the discharge side of a fan without silencer was measured to be 93.6 dBA, whereas it was significantly mitigated by 67.4 dBA to 70.1 dBA after installing all silencers. Dynamic insertion loss for a dissipative silencer with 100 cm length was predicted to be 27.9 dB, which was in agreement with experimental ones. Although, there was no significant differences between insertion loss of silencers, the one with 30% porosity and 120 Kg/m³ rock wool density had the highest insertion loss of 26.2 dBA. Dissipative silencers noticeably reduced centrifugal fan noise exposures. Increasing sound absorbent density and duct porosity up to a certain limit could probably be effective in noise reduction of dissipative silencers.     

三维非连续变形分析方法碰撞分析及其应用

将具有完备动力学理论的非连续变形分析(DDA)方法应用于块体碰撞研究。基于三维DDA(3D DDA)方法,按时步输出块体碰撞过程速度变化和接触嵌入量,进而得到块体碰撞恢复系数、冲量、冲击力。以此为参考指标,采用斜抛、面-面对心等碰撞模型,验证3D DDA方法模拟块体碰撞的有效性,并将3D DDA方法应用于多米诺骨牌倾倒、滚石边坡成灾及防护等算例分析,探讨了多米诺骨牌倾倒机制、滚石启动及运动行为、滚石灾害防护方案。结果表明:多米诺骨牌间距越大,同一块体被碰撞时间越迟,其最终稳定时间也越迟,与下一块体碰撞的动能越大;滚石运动呈侧向平动及转动三维运动特征,每一次碰撞,均引起动能、轨迹或状态的显著变化;滚石拦挡设施弹簧刚度越大,越先达到最大冲击力,最大冲击力随弹簧刚度的增加而减小;可结合树木阻挡效应,耗散滚石动能,降低滚石飞跃高度,使滚石灾害减轻或控制在防护范围以内。     

Dynamics of scalar fields in an expanding/contracting cosmos at finite temperature

This study extends the investigation of quantum dissipative effects of a cosmological scalar field by taking into account cosmic expansion and contraction.Cheung,Drewes,Kang,and Kim calculated the effective action and quantum dissipative effects of a cosmological scalar field in a recent work,where analytical expressions for the effective potential and damping coefficient were presented using a simple scalar model with quartic interactions,and the work was conducted using Minkowski-space propagators in loop diagrams.In this work,we incorporate the Hubble expansion and contraction of the cosmic background and focus on the thermal dynamics of a scalar field in a regime where the effective potential changes slowly.Given that the Hubble parameter,H,attains a small but non-zero value,we carry out calculations to the first order in H.If we set H=0,all results match those in flat spacetime.Interestingly,we must integrate over the resonances,which in turn leads to an amplification of the effects of a non-zero H.This is an intriguing phenomenon,which cannot be uncovered in flat spacetime.The implications on particle creations in the early universe will be studied in a forthcoming study.     

基于波长调制-直接吸收光谱方法的CO分子1567 nm处谱线参数高精度标定

直接吸收光谱(DAS)可直接测量分子吸收率函数,并通过拟合吸收率函数确定待测气体参数.波长调制-直接吸收光谱(WM-DAS)在DAS基础上,结合了波长调制光谱(WMS)中谐波分析思想,利用傅里叶变换复现吸收率函数,可有效提高吸收率函数的测量精度.本文利用WM-DAS方法结合长光程气体吸收池,在室温低压条件下,对CO分子1567 nm处R5-R11近红外弱吸收谱线吸收率函数进行了精确复现,其拟合残差标准差低至3×10^-5,随后根据测得的吸收率函数对谱线的碰撞展宽、Dicke收敛以及速度依赖的碰撞展宽系数等光谱参数进行了高精度标定,并将其与高灵敏度的连续波腔衰荡光谱(CW-CRDS)测量结果进行了比较,实验结果表明该方法与CW-CRDS测量结果具有高度一致性,更具有系统简单、测量速度快、对环境要求低等优点.     

Screening gas-phase chemical kinetic models: Collision limit compliance and ultrafast timescales

Detailed gas-phase chemical kinetic models are widely used in combustion research, and many new mechanisms for different fuels and reacting conditions are developed each year. Recent works have highlighted the need for error checking when preparing such models, but a useful community tool to perform such analysis is missing. In this work, we present a simple online tool to screen chemical kinetic mechanisms for bimolecular reactions exceeding collision limits. The tool is implemented on a user-friendly website, cloudflame.kaust.edu.sa, and checks three different classes of bimolecular reactions; (ie, pressure independent, pressure-dependent falloff, and pressure-dependent PLOG). In addition, two other online modules are provided to check thermodynamic properties and transport parameters to help kinetic model developers determine the sources of errors for reactions that are not collision limit compliant. Furthermore, issues related to unphysically fast timescales can remain an issue even if all bimolecular reactions are within collision limits. Therefore, we also present a procedure to screen ultrafast reaction timescales using computational singular perturbation. For demonstration purposes only, three versions of the rigorously developed AramcoMech are screened for collision limit compliance and ultrafast timescales, and recommendations are made for improving the models. Larger models for biodiesel surrogates, tetrahydropyran, and gasoline surrogates are also analyzed for exemplary purposes. Numerical simulations with updated kinetic parameters are presented to show improvements in wall-clock time when resolving ultrafast timescales.     

Stoichiometry-Controlled Synthesis of Nanoparticulate Mixed-Metal Oxyhydroxide Oxygen Evolving Catalysts by Electrochemistry in Aqueous Nanodroplets

Mixed-metal oxyhydroxides—especially those of Ni and Fe—are one of the most active classes of materials known for catalyzing the oxygen evolution reaction (OER). Here, nanoparticulate mixed metal oxyhydroxides (of Ni, Fe, and Co) were prepared on an electrode surface by electrochemical reaction of a precursor solution encapsulated in aqueous nanodroplets (AnDs), with each of the droplets containing 10 s of attoliters of fluid. Electrode reactions and synthesis can be monitored in situ by electrochemistry as single AnD stochastically lands and interacts with the working electrode. Resultant metal oxyhydroxide nanoparticles can be size and composition controlled precisely by modulating the precursor solution stored in the AnD. Nanoparticulate metal oxyhydroxides were implemented as catalysts for the OER and exhibited superior catalysis compared to their thin-film counterparts, demonstrating a hundred-thousand-fold enhancement in atom efficiency at comparable turnover rates.     

Nucleon effective mass splitting and density-dependent symmetry energy effects on elliptic flow in heavy ion collisions at E_(lab)= 0.09 ～ 1.5 GeV/nucleon

By incorporating an iso spin-dependent form of the momentum-dependent potential in the ultra-relativistic quantum molecular dynamics(UrQMD) model,we systematically investigate effects of the neutron-proton effective mass splitting m*_(n-p)=m*_n-m*_p/m and the density-dependent nuclear symmetry energy E_(sym)(ρ) on the elliptic flow v_2 in~(197)Au+~(197) Au collisions at beam energies from 0.09 to 1.5 GeV/nucleon.It is found that at higher beam energies(≥0.25 GeV/nucleon) with the approximately 75 MeV difference in slopes of the two different E_(sym)(ρ),and the variation of m*_(n-p) ranging from-0.03 to 0.03 at saturation density with isospin asymmetry δ=(ρ_n-ρ_p)/ρ-0.2,the E_(sym)(ρ) has a stronger influence on the difference in v_2 between neutrons and protons,i.e.,v_2~n-v_2~p,than m*_(n-p) has.Meanwhile,at lower beam energies(≤0.25 GeV/nucleon),v_2~n-v_2~p is sensitive to both the E_(sym)(ρ) and the m*_(n-p).Moreover,the influence of m*_(n-p) on v_2~n-v_2~p is more evident with the parameters of this study when using the soft,rather than stiff,symmetry energy.     

Superconvergence of a two‐grid method for fourth‐order dispersive‐dissipative wave equations

In this paper, the superconvergence analysis of a two‐grid method (TGM) with low‐order finite elements is presented for the fourth‐order dispersive‐dissipative wave equations for a second order fully discrete scheme. The superclose estimates in the H¹‐norm on the two grids are obtained by the combination technique of the interpolation and Ritz projection. Then, with the help of the interpolated postprocessing technique, the global superconvergence properties are deduced. Finally, numerical results are provided to show the performance of the proposed TGM for conforming bilinear element and nonconforming element, respectively. It shows that the TGM is an effective method to the problem considered of our paper compared with the traditional Galerkin finite element method (FEM).     

Non‐self‐adjoint singular second‐order dynamic operators on time scale

In this study, maximal dissipative second‐order dynamic operators on semi‐infinite time scale are studied in the Hilbert space , that the extensions of a minimal symmetric operator in limit‐point case. We construct a self‐adjoint dilation of the dissipative operator together with its incoming and outgoing spectral representations so that we can determine the scattering function of the dilation as stated in the scheme of Lax‐Phillips. Moreover, we construct a functional model of the dissipative operator and identify its characteristic function in terms of the Weyl‐Titchmarsh function of a self‐adjoint second‐order dynamic operator. Finally, we prove the theorems on completeness of the system of root functions of the dissipative and accumulative dynamic operators.